Raspberry PI 5 Enclosure

Compact case for Raspberry PI 5. It support RPI 5 and is compatible with Raspberry Pi Active Cooler

v1.1.0

This enclosure is designed to be sleek and minimalistic. It is designed to be 3D printed. This case does not provide any camera or display port access. But GPIO are easily accessibles.

HDMI side view"

“USB side view”

Compatibility

This enclosure support following boards:

Raspberry PI 5

Files

Two versions of the top part are available. One with GPIO access and one without. Ideal for a clean look or server applications like VPN, DNS…

Lower part

File: RPI_5_case_bottom.STL Bottom part of the enclosure common to all

Upper part GPIO

File: RPI_5_case_top.STL Orginal top part of the enclosure with GPIO access

Upper part without GPIO

File: RPI_5_case_top_no_gpio.STL Top part of the enclosure without GPIO access

GPIO Cover

File: gpio_cover.STL Cover for GPIO. Best of both worlds, clean look and easy access to GPIO

Thermal management

This enclosure is designed to be compatible with the official Raspberry Pi Active Cooler

“Internal view”

“Internal view with heatsink”

Material and print settings

Clearance is 0.2mm for all parts to facilitate assembly. No support is needed.

4x M3x24mm flat-head screws and 4x M3 nuts are needed to assemble the case.

Run button

1mm hole near micro sd-card.

RTC battery

Dedicated space for a CR2020 battery above Ethernet port.

Last updated on March 12, 2024

Orange PI Base CM4 Case