Github


Static Badge GitHub Release GitHub License

This enclosure is designed to be sleek and minimalistic. It is designed to be 3D printed. This case does not provide any camera or display port access. But GPIO are easily accessibles.

Compatibility

This enclosure support following boards:

  • Raspberry PI 4B

Files

Two versions of the upper part are available. One with GPIO access and one without. Ideal for a clean look or server applications like VPN, DNS…

Lower part

File: RPI_4b_case_bottom.STL Bottom part of the enclosure common to all

Upper part GPIO

File: RPI_4b_case_top.STL Orginal top part of the enclosure with GPIO access

Upper part without GPIO

File: RPI_4b_case_top_no_gpio.STL Top part of the enclosure without GPIO access

GPIO Cover

File: gpio_cover.STL Cover for GPIO. Best of both worlds, clean look and easy access to GPIO

Thermal management

This enclosure is designed to be used with passive cooling solution.

No need for fan event with intense CPU usage.

Material and print settings

Clearance is 0.2mm for all parts to facilitate assembly. No support is needed.

4x M3x24mm flat-head screws and 4x M3 nuts are needed to assemble the case.

Run button

1mm hole above jack connector is designed to fit a 6x6mm push button. This button can be used to wake the Raspberry PI.