Raspberry PI 5 Enclosure

This enclosure is designed to be sleek and minimalistic. It is designed to be 3D printed. This case does not provide any camera or display port access. But GPIO are easily accessibles.


Compatibility
This enclosure support following boards:
- Raspberry PI 5
Files
Two versions of the top part are availables. One with GPIO access and one without. Ideal for a clean look or server applications like VPN, DNS…
Lower part
File: RPI_5_case_bottom.STL
Bottom part of the enclosure common to all
Upper part GPIO
File: RPI_5_case_top.STL
Orginal top part of the enclosure with GPIO access
Upper part without GPIO
File: RPI_5_case_top_no_gpio.STL
Top part of the enclosure without GPIO access
GPIO Cover
File: gpio_cover.STL
Cover for GPIO. Best of both worlds, clean look and easy access to GPIO
Thermal management
This enclosure is designed to be compatible with the official Raspberry Pi Active Cooler


Material and print settings
Clearance is 0.2mm for all parts to facilitate assembly. No support is needed.
4x M3x24mm flat-head screws and 4x M3 nuts are needed to assemble the case.
Run button
1mm hole near micro sd-card.
RTC battery
Dedicated space for a CR2020 battery above Ethernet port.