Dev Board

Raspberry PI 5 Enclosure

This enclosure is designed to be sleek and minimalistic. It is designed to be 3D printed. This case does not provide any camera or display port access. But GPIO are easily accessibles. Compatibility This enclosure support following boards: Raspberry PI 5 Files Two versions of the top part are availables. One with GPIO access and one without. Ideal for a clean look or server applications like VPN, DNS…

Tuesday, March 12, 2024 | 1 minute Read

Orange PI Base CM4 Case

This enclosure is designed to be sleek and minimalistic. It is designed to be 3D printed. This case does not provide any camera or display port access. But allow use of M2 expension card / SSD and add compatibility with M2 2280 module. As OrangePI Base board is compatible with Raspberry PI CM4, this case is also compatible with Raspberry PI CM4.

Tuesday, February 20, 2024 | 1 minute Read

Raspberry PI 4 Enclosure

This enclosure is designed to be sleek and minimalistic. It is designed to be 3D printed. This case does not provide any camera or display port access. But GPIO are easily accessibles. Compatibility This enclosure support following boards: Raspberry PI 4B Files Two versions of the upper part are available. One with GPIO access and one without. Ideal for a clean look or server applications like VPN, DNS…

Tuesday, February 20, 2024 | 1 minute Read

Raspberry PI 1-3 Enclosure

This enclosure is designed to be sleek and minimalistic. It is designed to be 3D printed. This case does not provide any camera or display port access. But GPIO are easily accessibles. Compatibility This enclosure support following boards: Raspberry PI 1B+ Raspberry PI 2B Raspberry PI 2B 1.2 Raspberry PI 3B Raspberry PI 3B+ Files Two versions of the upper part are available. One with GPIO access and one without. Ideal for a clean look or server applications like VPN, DNS…

Saturday, February 3, 2024 | 2 minutes Read

Arduino Nano Enclosure

Overview Simple enclosure for Arduino Nano. It is designed to be 3D printed. Parts arduino-nano_top.stl Top part of the enclosure arduino-nano_bottom.stl Bottom part of the enclosure Assembly Provided 3mf file is tested and ready to print on Prusa MK3 . Parts are hold together by friction. No screws are needed.